10/100M 7ethernet ports fiber optical media converter

Fiber Switch 1,10/100/1000M or 10/100M 2,singlefiber or dule fibers 3,1 or 2 fiber interface,2-8 electric interfa 4,Switch 10/100M 7ethernet ports fiber optical media converter  1. InterfaceRJ-45 interfaceThe transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wireFiber interfaceSC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber). 2. ConnectionThe network device (work station, hub or switch ) with RJ-45 interface is connected to RJ-45 jack of switch through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. Main features:1. In conformity to IEEE 802.3 10 Base-T standard.In conformity to IEEE 802.3u 100 Base-TX/FX standard.2. Support 1k MAC address.3. Back pressure flow control for full duplex IEEE 802.3X and half duplex.4. Automatic identification of MDI/MDI-X cross line.5. Support max forwarding packet length 1552/ 1536 bytes option.6. In conformity to safety code of FCC and 15 CLASS A and CE MARK. Technical parameters:1. Standard Protocol: IEEE802.3 10 Base-T standard  IEEE 802.3u 100Base-TX/FX standard2.Connector:oneUTPRJ-45connector,oneSC/STconnector3. Operation mode: full duplex mode or half duplex mode4. Power supply parameter: outside: 5V DC 1A5. Environmental temperature: 0-60 centigrade6. Relative humidity: 5%-90%8. TP cable: Cat5 UTP cable9. Transfer fiber:    multi-mode: 50/125, 62.5/125 or 100/140μm    single mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm10 Dimensions: External power supply: 26mmx 71mm x 94mm